10, Yin angle plastic skirting tiles, the first two symmetrical composition of wood pressed on the inside of the corner with a plastic
plate, and then take out a piece of wood, the plastic plate turning
overlap,
draw the cutting line, try to install the appropriate cut, then the level of 45 degrees at the intersection of the rabbet welding, as Yin
angle parts, and welding or bonding. 11, plastic plate joints should be
treated with groove. When bonding, the groove is made into the same
direction and the overlap width is not less than 30mm;
when welding, the groove is made of V shaped groove; when the slope angle is beta: the thickness of the plate is 10 ~ 20mm, the thickness of
the plate is 85 =65 to 75 =75, and the thickness is from 2 to 8mm. In
the thick,
boat composite wood decking material malaysiaplastic facade panels price12 inch composite panelingused fence supplier in uae