1. Good uniform appearance and no crack are the basic appearances of
[u]high efficient metal abrasive disc[/u].
2. Excellent packaging and printing anti-counterfeiting barcode is the difference between a factory product and a counterfeit product.
3. The lower the static imbalance value of any wheel is, the better the production difficulty will be.
4. The general rule of cutting and grinding is that iron removal is less, the wear is low, the
[u]high efficient metal abrasive disc[/u] is too hard, the iron removal is less, the wear is too bad, the internal quality of high quality is as little wear as possible, the maximum amount of iron removal, and feel good at the same time.
5. For carbon steel, alloy steel, cast steel, stainless steel, copper-aluminum material, glass-stone material, because of their different density and heating conditions, it is decided to choose grinding wheels when there is a difference; for glass-stone, the market has a special tool for cutting and grinding glass-stone; Copper-aluminum and stainless steel solid material application thickness Lower or zirconium corundum-based cutting or grinding pieces; cutting carbon steel, stainless steel profiles (non-solid) require a higher hardness of the grinding wheel will greatly increase the life; but for solid round steel, forgings also require that the grinding wheel in the hardness cannot be too high, otherwise it will not be cut!
6. If you have a large amount of
[u]China high efficient grinding disc[/u] for one of the specifications, it is impossible to cut or grind the wheels most suitable for you in the market. Please contact our dealers and give us the details of the use. We can provide you with the abrasive products which can minimize the use cost.
