The
T41 4 inches cutting disc size isusually referred to as a fixed cutting table, a cutter with a power of <3 kW
and a speed of 2900 rpm. Ordinary cutters typically cut workpieces that are
less than 50 mm in diameter. However, due to the small cutting power in order
to reduce the radial frictional resistance, we usually choose a cutting piece
with a thickness of 3.2 mm. The cut piece is thinner and has a certain
elasticity, and it feels sharper when cut. In order to reduce the lateral
frictional resistance, Sanxiong Abrasives has changed the surface contact into
point contact, and the formulation system has added lubricant, which can
greatly reduce the friction heat generated during cutting and improve the
durability and sharpness of the cutting piece.
