The grinding with
high quality grinding disc factory price is widely used for its excellent performance. The grinding disc plays an important role in industrial production. The correct installation of the grinding disc is directly related to the safety in the production process. Do you know the precautions for the grinding disc during installation? Below we Let's take a look at the relevant content.
1. Before installing the grinding disc, the marking of the cutting piece with high quality grinding disc factory price must be checked first. The grinding disc with unclear or no marking must be re-tested by the rotation, otherwise, it is easy to be confused.
2. We must understand the working line speed of the grinding disc. If the cutting piece with a working line speed of 50m/s is installed on a machine with a working line speed of 80m/s, it will easily break.
3. Before installation, use a wooden hammer to tap the grinding disc. If a crisp sound is heard, the grinding disc is qualified. Otherwise, there may be cracks in the grinding disc. This grinding disc cannot be used.
4. The flanges sandwiched on both sides shall have the same shape and shape. The diameter of the flange is generally half the diameter of the resin grinding disc, and the inner side shall have a concave groove. Between the end face of the grinding disc with high quality grinding disc factory price and the flange, a thickness shall be placed. Approximately 1 to 2 mm of elastic cardboard or leather, oil-resistant rubber gasket, the diameter of the gasket should be slightly larger than the outer diameter of the flange.
5. The flange screws should be tightened symmetrically in order to make the clamping force evenly distributed, but the force should not be too strong, otherwise, one side will be fractured.
6. After the grinding disc with high quality grinding disc factory price is installed, it must be idling for one minute. This is for the last time to check the quality of the grinding disc. After the installation, the cutting piece must be carefully checked before use. It should work under high-speed rotation conditions. The installation must be secure and balanced. To avoid personal and quality accidents caused by cracks in some quality problems due to high-speed operation.
The above is the relevant matters needing attention in the installation of the grinding disc, then our Henan Aurora Abrasive Tool Co., Ltd. specializes in grinding disc cutting, grinding disc ultra-thin, Henan abrasive grinding equipment special equipment development and production management business. For details, please consult high quality grinding disc factory price with us.
