What should you pay attention to whenusing
115 golden star cutting disc users? Today, Aurora Abrasives will give you
a brief introduction according to your needs:
1. Wear protective glasses, masks,earplugs, gloves, dustproof clothing;
2. Never use the side of the cuttingpiece;
3. The maximum use cycle speed of theVenus cutting piece, the highest use of the number of revolutions;
4. Use the correct flange. Noenhancement: 1/3 or more; there is enhancement: 1/4 or more;
5. Confirm that the cutting piece has nomissing edges, no cracks, no cracks, etc. before use;
6. Before starting to use the cuttingpiece, please use it for one minute and then use it. When replacing the cutting
piece of the new variety, please idle for 3 minutes before using it.
7. Store the cutting piece in a placewhere there is no direct sunlight, no moisture, and place it horizontally;
8. The fixed object is firmly fixed;
9. Use an angle grinder with a safetycover, a cutting machine with a safety cover;
10. If the inner diameter of the cuttingpiece is small and the device does not match, please do not change the hole
diameter of the grinding wheel.