The
China Diesel Motor Multi-Crop PaddyWheat Rice Thresher 125 are as follows:
1. Rice-wheat thresher needs to choose a spacious work site.
2. Select the supporting power according to the requirements, and equip the pulley with the appropriate diameter according
to the instruction manual to ensure the working speed meets the requirements.
3. The machine is firmly installed on solid ground so that the air outlet is the same as the wind direction, so as not to affect the cleaning effect.
4. Check that all fastening screws are tight. If it is loose or falling off, it should be tightened or replaced in
time.
5. The power control switch should be installed near the machine, not too far, such as the occurrence of blockages
and other special circumstances during work, easy to power off in time.
The trial operation of the rice-wheat thresher is as follows:
1. Check the inside of the machine and the feeding table for tools, etc., whether the direction of power rotation is
consistent with the requirements, and lubricate the lubrication points.
2. First, gently turn the pulley by hand to observe whether the machine has collision or
jamming.
3. No load test run for 10 to 15 minutes and observe its operation.
4. The rice-wheat-thresher is evenly fed into the vine to carry out load test operation, observe
the operation of various parts of the machine, whether there is abnormal
phenomenon such as strong vibration, and check whether the quality of the
picked fruit meets the requirements. After running for 20 minutes, check the
parking once and make the necessary adjustments. Only after everything is normal
can you officially work?
