Constructing highlighting classes and installation and implementation steps

232 views 0 replies
Reply to Topic
saftysign

Age: 2023
Total Posts: 0
Points: 10

Location:
,
Steps to build bold letters:
Today, as we pass through the passageways, all of us, unwittingly, see modern billboards with special designs and lighting and a variety of lighting that a number of people pass through without regard to these signs, but for some, these beautiful boards attract attention. And they are asking them how to build and install the red carpet in shops or streets? Now, to answer this question, we will refer to the stages of construction and installation of highlights.
Teaching Constructing Letters of Prominent Chellium:
In the first step, designing and implementing a highlighted letterboards will first design the letters of an advertising sticker using the CorelDRAW program or the AutoCAD program, and we will implement our custom and desired settings in terms of font size, size, and thickness.
In the second stage, the design was done in full accordance with the customer's taste and needs, it turns to laser letters. At this stage, the design of the letters is based on sheets made of acrylic or plexiglas, which itself has a variety of colors. And according to the customer's order, the color is selected and the letters on it will be laser.
In the third step, it is time to paste the cut-out plan by the laser machine, which at this stage glued the chelnium edges with the precision of the circumference of the plexiglas, but if this is done by the chlenium maker, all the bending steps and the creation of the arches and grooves on the edge The chlinnium is based on a file and is given by computer as a feed to the device, and the chlenium maker starts up according to that file, but because it is designed by Europeans and only for Latin fonts, it is designed in Farsi fonts design He has a problem and can not create a beautiful design like this, while using this handgun Sometimes they also cause lines and scratches on letters.
In the fourth step, we prepared the letters and the chelnium edge for paste, using the special magnets and plexiglass adhesives. At this stage, it's time to build the letters and turn to the substructure. We use polyester sheets of 8 or 10 mm thick to build the highlights. By placing the letters on a PVC sheet and bypassing it, using a chainsaw and moving it away, we use SMD bulbs to illuminate the letters. At the beginning of the installation of SMD lamps, we clean the PVC surface. Behind SMD bulbs contain protective glues that we separate them when installing lamps. After isolating the shield, put the bulbs apart at 3 to 4 cm intervals, so that the entire PVC surface Completely covered. Observing the distance between the bulbs is of particular importance because, if spaced apart, it creates a dark and bright space between letters that sometimes overcomes the beauty of the work. At this stage, the other letters are ready for installation and implementation on the intended surfaces, which can be of composite, thermoform or any other surface.
Installation steps:
To install a simple billboard, a simple and solid foundation is enough, but if you want to install a chelnium advertising post, we first use a plot to fit the design in place for installation, and then put the PVC sheet on the plan. And we are tightening our own after installing PVC and installing SMD lamps and by piercing the PVC, we transfer additional wires to the back of the work and exchange electric current between the lamps using positive and negative poles After doing this, we tested the lighting, and when everything was tidy and there was no problem. Let's put the letters on the pvc. For the letters to be more beautiful and attractive, and better to appear, it is best to use the material of the chlinnium to cover the front and the back of the letters so that they can not be seen and beautify.
Posted 16 Apr 2019

Reply to Topic