.jpg)
Steel plastic geogrid made in China is widely used in engineering and plays an important role. What should you pay attention to when transporting and stacking steel plastic geogrid? Steel-plastic grille manufacturers will answer you:
During transportation, the steel geogrid should be prevented from colliding and the steel geogrid damaged or the plastic geogrid bent. The number of layers of the steel-plastic geogrid should not be too high, and the fulcrum should be set reasonably. The two sides of the steel-plastic geogrid should be supported to prevent rolling. Waterborne steel plastic geogrid should be transported by ship and can be transported by sealing float or other means. When transported by ship, the ship must have sufficient length and stability. The steel geogrid is placed on a semi-circular special bracket and can be fastened with a cable if necessary. When using sealed floating transport, the watertight requirements should be met, and considering the influence of wind and waves, the sealing device should be easy to install and disassemble.
Steel-plastic grid inspection of the plane position, size, base elevation, steel geogrid inspection base geological conditions, and steel-plastic geogrid load is consistent with the design data, steel-plastic geogrid inspection substrate treatment and drainage Whether the situation meets the requirements of this specification, the steel plastic geogrid storage construction site such as the steel plastic geogrid inspection construction record and related test data should be smooth, solid and smooth.
