Geomembrane is usable in many industries. What should we pay attention to during the use? Now let's take a closer look at this knowledge introduction?
The width of the
wholesale aquaculture geomembrane bonding seam is usually 10cm, and the minimum bonding width should be no less than 8cm. Its own bonding should be done indoors first, the splicing workshop should have a roof to prevent rain, natural ventilation, easy to volatilize adhesives and other organic solvents, and should strengthen staff labor protection methods. When bonding on site, the contractor shall adopt different construction methods according to the requirements of different weather conditions. In good weather, it is necessary to wipe hard to prevent dust and debris from falling on the bonding surface.
The strength of the remaining
low price aquaculture geomembrane after bonding should not decrease, and the bonding strength should not be lower than the design strength after the adhesive is soaked in water. After passing the inspection and reporting to the supervision engineer for approval, the construction is underway.