Maybe you have purchased and used an awesome oxygen compressor? In certainty, even if it is in fact simple, using an oxygen compressor is not always easy. However, the maintenance considering the oxygen compressor is critical.
Main:
How to get an oxygen compressor?
O2 compressor regime maintenance and precautions
To summarize
Easy methods to utilize an oxygen compressor?
Using an oxygen compressor simply isn't as complicated as you could possibly think, it's actually very simple. After the compressor is actually installed, it can often be place in normal function after standard test. If you wish to adjust a parameter, you might want to follow the steps listed below:
1. Pressure switch setpoint move
The machine usually attributes 2 pressure switches. Finding the one you could adjust not only needs to learn to use the oxygen compressor, and also the maintenance of the true oxygen compressor, because it relates to normal use. Control fundamental principle: Loading pressure (starting pressure) + differential tension = stop pressure.
l The minute adjusting, take the pressure gauge since the standard and loosen this kind of tightening nut;
l Lessen the loading pressure: change the pressure adjusting attach clockwise (pointer up, pressure decrease) for half 7 days, observe whether the launching pressure meets certain requirements (because the pressure difference isn't really adjusted, the stopping desire will change accordingly), usually, adjust it appropriately.
l Raise the pressure difference: rotate this particular differential pressure adjustment put counterclockwise (the pointer adjustments down, the pressure difference increases) for half A week, and observe whether the pressure difference could possibly be the stop pressure or definitely not, if no adjustment is usually created.
l After each and every strain value is reset to zero, lock the nut and also correct the parameters once. Increase the loading pressure or reduce the pressure difference plus reverse the actual adjustment because described above. The inlet pressure switch adjustment method is certainly the same, but the wiring method takes another approach, the stop pressure currently = starting force - differential pressure. Its strictly forbidden to perform the equipment above this rated harrow pressure.
COUPLE OF. Temp controller adjustment
Each stage of the compressor gives you some sort of temperature controller, and that is installed around the control cabinet panel in fact it is set at the making plant.
Set it, in the event you should reset, please refer towards the manual of the clever temperature controller.
3. Energy relay regulation
The thermal relay acts being a motor overload protection. From time to time, the motor will end rotating. If the set value is chose to be malfunctioning, it needs to be properly adjusted by specialist electric work, and the running current should be measured. When the compressor can be working normally, there is less work for being maintained, but it needs to be handled by a person. It should be patrolled twice per shift to observe whether the compressor boasts abnormal heat, abnormal vibration, unusually high sound, etc. If it is important, stop it immediately. Right away after confirming the troubleshooting, you should continue to run. Whenever they get home of each one shift, the ability should be turned off and also the intake valve closed. In order to ensure long-term reliable operation inside the machine, it must continually be checked regularly.
Oxygen compressor plan maintenance and precautions
A REAL. When the compressor is probably running, it must meticulously do necessary inspections as well as inspections, monitor the operating conditions about the compressor, closely monitor this kind of suction, exhaust pressure along with temperature, exhaust volume, cooling water temperature along with control indicators, pay special attention to abnormal sound, and Record every from time to time.
2. During the operating, the process gas will be strictly prevented from being crushed within the low-pressure cylinder and other gas pipelines due to the high-pressure cylinder to avoid oil, water and drinking water.
3. It is forbidden to control the compressor under over-temperature, over-pressure in conjunction with over-speed. If there is definitely any abnormality, you should carefully clear away the fault and report it in time.
4. Gas leakage Once the vehicle is in catastrophe stop, the power really should be cut off in the specific substation.
5. When repairing the gear, carefully check the maintenance license plus the relevant safety inspection regulations to be sure the safety of this specific inspection.
6. When implementing an oxygen compressor, will not use oily sand to wipe kit, pipes, valves and pieces. Do not be infected by oil. Degreasing treatment really should be carried out after examination, and flammable gas leakage monitoring equipment ought to be provided.
7. Check the device room and arbitrarily lot flammable materials.
In deduce
You don't have to worry about the caliber belonging to the compressor, because your breathable oxygen compressors, nitrogen compressors, CARBON DIOXIDE compressors, etc. have passed the EU CE certification and are also also recognized for the safety in the compressor. If you still don't understand how to use it, you can easily consult us. But make sure to pay attention to safety work.
https://www.oxygen-compressors.com/Oxygen-Compressor-pl3626255.html Oxygen Compressor 201911ld
