ISO13728 Panama Chock

54 views 0 replies
Reply to Topic
pinkledstone

Age: 2020
Total Posts: 0
Points: 10

Location:
,
The Panama chocks are made according to the ISO 13728 standard and are normally adopted for ships passing through the Panama Canal, which are normally assisted by locomotives using steel towing wire. They meet normal mooring requirements and Panama Canal requirements. The material is steel casting material, having a yield point of not less than 235N/mm2 or equivalent. The carbon contents of the steel casting for ISO13728 chock shall not be more than 0.23% considering weldability. The nominal size of the chock is denoted by reference to the width of the opening, in millimeters, which are 310mm and 360mm. It can be classified as deck-mounted Panama chock and bulwark mounted one according to their installation site. YSmarines is one of the leading manufacturers in china for superior quality Panama chock.
Posted 19 Nov 2020

Reply to Topic