During installation, we need to keep the ground level during installation, and the water tank needs a flat ground or can be slightly
inclined to a certain angle in the direction of the leak to facilitate
the discharge of sewage.
Test machine inspection: During the test machine, the system of temperature supply, humidity supply, alarm bell, fan, etc., and the
rolling of the motor should be checked in detail.The above parts are
normal. After the test machine runs for 1 to 2 days, the body can be
formally inspected. After opening the door repeatedly, check whether it
is tight, whether the four walls, top, and bottom of the body are
deformed, and if any defects are found, repair them in time. Correct and
repair the machine. One week before the incubation, the system should
be checked to see if the installation is stable and strong and whether
the electrical systems are connected properly, sensitively, and
accurately.
The operator must operate the machine in accordance with the method described in the operation of the egg washer. When inspecting the egg
washer or cleaning the internal foreign objects, the egg washer must be
shut down and powered off before operating.
The egg washing machine needs to check whether the circuit is intact regularly, and it is strictly forbidden to contact the circuit with
water to avoid damage to the circuit insulation layer and cause a short
circuit.
The use of an egg washer for cleaning can increase the appearance of the eggs. The egg washer can not only clean the dirt such as feces and
straw on the surface of the eggs, but its special cleaning fluid can
also kill the harmful microorganisms carried from the poultry intestines
on the surface of the eggs.
