Architectural ring mesh mode

11 views 0 replies
Reply to Topic
wisepowder

Age: 2020
Total Posts: 0
Points: 10

Location:
,
Architectural ring mesh is a ring topology composed of a group of IEEE 802.1 compatible architectural ring mesh nodes. Each node is connected
with the other two nodes through the ring port based on 802.3 media
access control (MAC). Architectural ring mesh Mac can be carried by
other service layer technologies (such as architectural ring of sdhvc
and MPLS) All nodes can communicate directly or indirectly.To get more
news about architectural ring mesh, you can visit mesh-fabrics.com official website.

Architectural ring mesh refers to both physical ring topology and logical topology, in which the traffic is completely forwarded based on
the forwarding rules of IEEE 802.1 specification, supporting
architectural ring mesh services such as point-to-point, multipoint to
multipoint and point to multipoint, including architectural ring mesh
special line and architectural ring Mesh virtual private line, which
supports various modes of communication, including unicast, multicast
and broadcast, can prevent data disorder and duplication.

For the interconnection of architectural ring mesh, architectural ring mesh can be interconnected through three modes: shared node, link
composed of two shared nodes, and multi ring / layer network formed by
overlapping architectural ring mesh. Services can be transmitted
end-to-end through interconnected architectural ring mesh.

Posted 4 week ago

Reply to Topic