The after-sales service is a lot of sand making machine user concerns. On the
sand making machine operation specification and attention, we also consulted a number of manufacturers, summed up the following points. The user can do some reference before operating system sand machine.
Run check adjustable vortex chamber observation door is closed, to prevent the material from the whirl cavity observation door out of danger;
Check the impeller rotation direction, from the inlet direction. Impeller should counterclockwise rotation, otherwise should adjust the motor wiring;
Crushing machine and conveying equipment startup order: row material, crushing machine, feeding;
Crusher start to load, the crusher is operating normally after the direction of feed, the shutdown sequence and boot in reverse order.
The discharging equipment to stop, should promptly stop feeding, otherwise, will cause squished impeller, burning of the electric motor; the 6 feeding to the continuous uniform;
Crusher operation process, there shall be no violent vibration and abnormal noise, otherwise, it should stop checking;
Sand making machine lubrication, lubrication grease lubrication by the way, the car with grease superfine, adding amount of the bearing cavity 1/2-2/3, crusher every class, adding grease, the work of a number of class, open the main bearing cleaning main bearing, bearing replacement when necessary.
