What are the safety precautions for green cutting disc?

 green cutting disc are a common type of cutting disc, but at the same time, because it is
relatively sharp, it is also a dangerous operation. Therefore, in order to
increase its safety factor when using it, some details must be paid attention
to. Today, I will give you a summary of what details need to be noted.
1. Before starting to use the greencutting disc, please use it for one minute and then use it. When replacing the
cutting piece of the new variety, please idle for 3 minutes before using it.
2. An angle grinder with a safety coverand a cutting machine with a safety cover;
3. When using, be sure to fix the cutmaterial firmly;
4, users must wear protective glasses,masks, earplugs, gloves, dust-proof clothing, etc., to take protective
measures.
5, the cutting piece is stored in aplace without direct sunlight, no moisture, and placed horizontally;
6. If the inner diameter of the cutting pieceis small and the equipment does not match, please do not change the hole
diameter of the grinding wheel;
7. The maximum use cycle speed of thecutting piece is used below the maximum number of revolutions;
8. Confirm that the cutting piece has nomissing edges, no cracks, no cracks, etc. before use;
9. Never use the side of the cuttingpiece.