Some users buy cutting discs for cuttingproducts, but some users can't use cutting discs very well after purchase.
There are always some problems in this way, such as how to handle the stone
when cutting the cutting stone. Sewing, the following is a
T41 4 inches cutting
disc size .jpg)
as an example to show you how to use the cutting disc equipment.
Everyone knows that the cutting of stonegenerally needs to be done with the cutting piece in the machine. When cutting
the stone with the cutting disc, it is necessary to know that the seam
processing is not good, and it is easy to cause the stone damage during the
later use.
Determine the width of the stone to becut, select the suitable cutting disk, and then confirm the thickness of the
stone to adjust the height of the cutting plate; then use the wooden line to
pull the line, the cutting machine cuts the stone seam is, if the cutting surface has jagged scratches, please Immediatelyreplace the cutting disc, use the vacuum cleaner to clean the garbage, and then
use a semi-wet towel to remove the dust. After waiting for about half an hour,
you can fill the seam with the adjusted stone sealant. The seaming method of
the cutting disc is often said. Slot treatment and seamless processing.
Cutting and seaming are a common processencountered in stone installation and grinding renovation. If you want to
handle the stone joints, you must strictly follow the construction procedures
to make the stone evenly level when installing or renovating.
