Sand making equipment is an indispensable mining equipment in sand making production lines, and is also a good crushing stone machine at present. It is suitable for construction sand and road construction sand. How to improve the efficiency of sand making machines, It is essential to play the most powerful function. The reasonable operation of the sand making machine equipment can improve the efficiency of the machine sand equipment, so that it can better display its excellent performance!
The new type of
artificial sand making machine can break all kinds of hard rock (mountain stone, granite, basalt, limestone, river pebble, etc.) into non-metallic ores of different sizes, and the sand has a uniform particle size, The compressive strength is higher than the sand produced by natural sand and hammer breaking, which is more in line with the requirements of high-standard construction sand and can improve the construction quality. The equipment of the sand production line has reliable performance, reasonable design, convenient operation and high work efficiency.
The guarantee of the smooth production of the sand making machine when the sand making machine equipment is operated reasonably. Introduction of professional sand making equipment production for you
Introduction to the operation of sand making equipment:
1.Check whether the vortex cavity observation door is tightly closed before opening the sand making machine to prevent material from rushing out of the vortex cavity observation door and cause danger.
2.Check the rotation direction of the sand making machine impeller, looking from the direction of the inlet. The impeller of the sand washing machine should be turned counterclockwise, otherwise the motor wiring should be adjusted.
3.The startup sequence of the crusher and the conveyor equipment such as the belt conveyor or the screw conveyor is: the discharger, the crusher, and the feed crusher must be started without load. After the crusher runs normally, the belt conveyor can transport the stone to the vibration feeder Feeding by feeder. Shutdown sequence is opposite to startup sequence.
4.The feed particles are strictly in accordance with the requirements.It is forbidden to enter the stone crusher larger than the specified material, otherwise, it will cause the imbalance of the impeller and excessive wear of the impeller, which will eventually block the impeller channel and the central feeding tube, making the crusher unable to work normally. If excessive feed is found, it should be eliminated in time.
5.When the discharge equipment stops, the feeding should be stopped in time, otherwise it will cause the impeller to be crushed and the motor will be burned.
6.Lubrication of the machine The lubrication method is dry oil lubrication. It uses Mobil special grease for automotive use, and the amount is 1 / 2-2 / 3 of the bearing cavity. When the crusher works, add an appropriate amount of grease.
7.During the operation of the crusher, there must be no severe vibration and abnormal noise, otherwise, it should be stopped for inspection.
8.Vibration feeding and continuous and uniform feeding force are required during feeding.
