A100 Infrared Edge Sensor For Reading Web Edge

66 views 0 replies
Reply to Topic

Age: 2023
Total Posts: 0
Points: 10

Arise A100 infrared edge sensors are specifically designed to read the edge of webs which has the features of sound-transparent, thick weaves and non-transparent. The web guide sensor uses an infrared LED as the light source. The light is reflected through the material and is then recorded by a CCD line. The CCD elements illuminated in this way in the edge sensor issue a higher signal level.  The signal level can be converted into an output value proportional to the web edge position. 
1. Adopting high-speed DSP chip, full digital processing, truly no drift, strong anti-interference ability
2. Adopting imported infrared-sensitive components with 0.01mm resolution
3. Fully sealed titanium alloy shell design with special surface treatment, to prevent dust and pollution, anti-corrosion
4. It can detect any material (including mesh material) without adjustment
5. DC12V single power supply, 0-5V analog output, two switch output
6. Easy setup
Posted 28 Apr 2021

Reply to Topic