Decking wet sleeve block

316 views 4 replies
Reply to Topic

Age: 2021
Total Posts: 0
Points: 10

Hey everyone quick question that I’ve been wondering and can’t seem to find the answer or decide firmly on correct procedure.

On a wet sleeve motor like the 226 engine if my surface had enough pitting
or gouges/scratch’s that I would want to deck it how is that done with
the wet sleeve system.

Would you install sleeves then deck it to still allow some protrusion so deck block an extra 2-5 thousands to
allow the sleeve to stick out that amount or just deck them both the
same or sleeves flush with block.

Also is it possible to deck block without sleeves and then bore counter bores. I assume if this was
done wouldn’t it throw off the location of the o ring seating surface
from the sleeve to block.

Thanks and any info would be appreciated. I just wanted to know if I ever decided or needed to re
sleeve this motor for any reason and the block was decked say 8-12
thousands would
The new sleeves need to be cut or shaved? What is the process involved in decking a wet sleeve?

Posted 28 May 2021

GroovEye says
[table][tr][td]Deck the block only enough to flatten/clean up pits then bore out the counter bores same amount.   Do nothing with the sleeves.  

Posted 28 May 2021

Nortman says
In nearly 50 years of working on/overhauling those engines, I have NEVER had one decked. It would require decking X amount from the surface and  then the same amount in the counterbores. Any pitting on the deck surface I have had is handled with sealer on both sides of the head  gasket , good torqueing of the head bolts and retorqueing after a short time when stone cold.
Posted 28 May 2021

Striker1s says
I bought a cabin near a lake a few months ago. I wanted to build a deck for it but I didn't have any idea of a model or how to build it. A friend suggested getting in touch with With the help of their engineers, I chose a model and in 1 month and a half, the deck was done. I find it stable and durable and so far I like the result. I suggest you contact them if you want some advice. I'm sure the engineers wouldn't mind leaving some suggestions.
Posted 28 May 2021

Jaipur Escorts
Ajmer Escorts
Alwar Escorts
Banswara Escorts
Baran Escorts
Barmer Escorts
Bharatpur Escorts
Bhilwara Escorts
Bikaner Escorts
Bundi Escorts
Chittorgarh Escorts
Churu Escorts
Dausa Escorts
Dholpur Escorts
Dungarpur Escorts
Ganganagar Escorts
Hanumangarh Escorts
Jaisalmer Escorts
Jalore Escorts
Jhalawar Escorts
Jhunjhunu Escorts
Jodhpur Escorts
Karauli Escorts
Kota Escorts
Nagaur Escorts
Pali Escorts
Pratapgarh Escorts
Rajsamand Escorts
Sawai Madhopur Escorts
Sikar Escorts
Sirohi Escorts
Tonk Escorts
Udaipur Escorts
Indore Escorts
Betul Escorts
Bhind Escorts
Bhopal Escorts
Dewas Escorts
Dhar Escorts
East Nimar Escorts
Gwalior Escorts
Jabalpur Escorts
Neemuch Escorts
Rajgarh Escorts
Ratlam Escorts
Rewa Escorts
Sagar Escorts
Satna Escorts
Sheopur Escorts
Shivpuri Escorts
Ujjain Escorts
Vidisha Escorts
West Nimar Escorts
Ahmedabad Escorts
Amreli Escorts
Anand Escorts
Bharuch Escorts
Bhavnagar Escorts
Dahod Escorts
Jamnagar Escorts
Junagarh Escorts
Patan Escorts
Porbandar Escorts
Rajkot Escorts
Surat Escorts
Vadodara Escorts
Bilaspur Escorts
Chamba Escorts
Hamirpur Escorts
Kangra Escorts
Kinnaur Escorts
Kullu Escorts
Shimla Escorts
Agra Escorts
Allahabad Escorts
Bareilly Escorts
Bijnor Escorts
Lucknow Escorts
Gorakhpur Escorts
Mathura Escorts
Varanasi Escorts
Patna Escorts
Buxar Escorts
Darbhanga Escorts
Gaya Escorts
Rohtas Escorts
Beawar Escorts
Kishangarh Escorts
Nasirabad Escorts
Pushkar Escorts
Agar Malwa Escorts
Bhadrak Escorts
Bhiwani Escorts
Bidar Escorts
Dhamtari Escorts
Dharmapuri Escorts
East Siang Escorts
Hailakandi Escorts
Jajpur Escorts
Nellore Escorts
Ratnagiri Escorts
Rewari Escorts
Saharanpur Escorts
Seelampur Escorts
Shillong Escorts
Shi Yomi Escorts
Ukhrul Escorts
Vijayapura Escorts
West Siang Escorts
Ahmednagar Escorts
Posted 30 Jun 2021

Reply to Topic