Before you start with the Netgear Router setup, you need to physically connect your router. Use
netgear wnr1000 manual for the setup. Remove all the cables connected to your PC. Turn on the modem. Use the Ethernet cable to plug one of its ends to the modem and the other end to the internet port of the router. Plug one end of an Ethernet cable to the LAN port of your PC and the other end to any of the LAN ports of the router. Then switch on the router and ensure that the power lamp is on. Once you connect your PC to the Netgear Wireless N300 Router, you can log in to the router now by opening a web browser on your computer.On the browser’s address bar,type http://www.routerlogin.com or 192.168.1.1, and hit Enter. Enter the default username and default password. Then click on login.