Disconnect any cables connected to your computer. Switch on the modem and ensure that the power lamp is on. Connect one end of an Ethernet cable to the modem and the other end to the internet port of the router. You will find the internet port slightly set apart from other LAN ports on the router. Visit www.routerlogin.com to log into the router management console. In case that doesn’t work, type 192.168.1.1 into the browser’s address bar and press Enter. Enter the default username and
Netgear WNR2200 default password. You will find this information on the back or bottom of the router. If you encounter issues with the router, then try updating the
Netgear wnr2020 firmware.
