266 views 2 replies
Reply to Topic

Age: 28
Total Posts: 72
Points: 10

New York, United States
Locate the powercable and connect it to a power source like an outlet or surge protector. Plug
the other end of the power cable to the router's power input, which is
typically located in the rear. Your router must be connected to a modem in
order to provide the local network with an Internet connection. To configure Linksys Router, acquire an Ethernet cable. Take oneend of the cable and plug it into the Internet port on the rear of your router.
The port may be blue or grey. Takeone end of the cable and plug it into an available Ethernet port on the rear of
your modem. These ports are typically yellow. Usually, this is all that is
needed to connect your router to a wired connection.
Read more
resetting linksysrouter
Posted 29 Sep 2021

It's hard to tell right away, you need to study the issue in more detail
Posted 01 Oct 2021

alterthoms says
Configure the Linksys Router Through a Connection. This can be done using a secure VPN connection, which essentially masks your network traffic and provides encryption to protect it. With a good VPN, you will be able to connect to other devices on your network securely, even if they are located behind a NAT device that is blocking third-party traffic. when it comes to private internet connections like cyber security and privacy. Not only will your private information be protected with a VPN service but also your internet speeds will improve due to the speed of your connections which are encrypted by an encryption key.
Posted 28 Aug 2022

Reply to Topic