To
configure Belkin router as access point, start by opening a web browser toaccess the router’s web-based setup page. Proceed to wireless > channel and
SSID, and configure AP’s wireless network name. To configure the network
security, go to wireless > security; save the settings before heading to the
next step. After the wireless settings have been configured, proceed to the
wireless section and tap to use as an access point. Now, choose to enable. It
will give you the option to set the IP address and subnet mask for the router.
Your current settings should match the existing network settings. Enter the
unique IP address and tap to apply changes. When using an Ethernet cable, wire
the access point/ secondary router to the main router through the LAN ports of
both devices. Now, you can connect the device to the new wireless connection as
you have successfully configured the Belkin router as an access point.
Read more
belkin range extender setup f9k1106v1
