How to install led tri-proof lights?
There are two ways to install three-proof light. One is to use the kit on the top of the fixtures to directly install it on the wall, or to use the attached wire rope to achieve suspension installation. Which installation method to use depends on its application.
How many kinds of tri-proof lights are there in the lighting market?
1. Fluorescent tri-proof light
fluorescent triproof light
The three-proof fluorescent is the first generation of three anti-lights. Before the release of the LED light source, its position in the lighting market should not be underestimated, you can see it used in harsh environments. The first generation of tri-proof luminaires consisted of 0-4 fluorescent lamps and a highly sealed outer casing. Its advantages are only cheaper, but the disadvantages are high maintenance costs, environmental pollution, and low water resistance.
2. LED tube tri-proof light
led tube tri proof light
The LED tube was the first to replace the fluorescent in the three-proof lamp. From a replacement point of view, this solution is really convenient, just open the cover and replace the tube inside. But its wiring is not simple, you need to redesign the wiring diagram specifically for it. The degree of illumination is limited because its replaceable wattage and power are limited.
3. IP65/IP66 traditional tri-proof light replacement
led triproof light
In order to eliminate the shortcomings of the above two lamps, the IP65/IP66 tri-proof light was designed. It consists of a PC cover, die-casting aluminum housing, led light source board, led driver. No ballast obstacles, higher energy conversion efficiency. Of course, its price will naturally be more expensive than the above two. But it has added value, can achieve the sensing function -1-10v dimming or motion sensor, and even install the emergency power pack, which means durability lights can also work several hours during the power cut.
4. Slim batten light
slim batten light
As seen in the picture, this slim batten is flat-shaped, so it is also named as a batten light. Its slim design makes it require less material, thus it is more suitable for projects with small budgets. The small size of the shape allows it illuminates in narrow spaces. Petite is one of the major features but it is also the biggest drawback because the lighting space is limited, can not accommodate high-powered power, therefore, the light efficiency is also low, the highest is only 110 lumen per watt.
5. Integrated aluminum led tri-proof fixture
alu tri proof light
This one is definitely the highest equipped led tri-proof lamp, the aluminum alloy case shows better heat dissipation performance and longer service life. The two ends of the luminaire have two end cap, so the lighting is more concentrated. Except for the highest price, it has almost no shortcomings.
