Today, the editor continues to sort out some sudden failures and solutions of mini cement plants for you. The sudden failure of the
mini cement plant is generally caused by multiple reasons such as long-term high-speed operation, job responsibility and improper operation.
The stator coil of the mini cement plant is broken down in the whole system of the mini cement plant. There will be iron-containing dust in the air around the material. After a long time of operation, the iron-containing dust will adhere to the coil of the mini cement plant stator. Thickness will cause short-circuit discharge on the surface of the stator coil. When a short circuit occurs for many times, the insulator of the coil will be damaged, resulting in the phenomenon of ignition breakdown, which will cause the mini cement plant to stop running.
Friction generates heat and heats up rapidly, causing the surface of the tile lining to be melted and scratched. If there is no spare spherical tile, it can only be stopped for inspection, and the tile surface can be repaired before continuing to use. The smoothness of the scratched surface can be restored by filing, cutting, grinding, etc., but the undamaged part needs to scrape out a micro oil groove, repair the tile mouth, and empty the material and grinding medium in the mini cement plant.
Manual methods are used. , Rotate the cylinder for no-load grinding, and when it reaches a certain level, carry out a no-load test operation with the transmission part, and then load the material and grinding medium into the mini cement plant for load operation, so that the mini cement plant can resume normal operation.
