The precision of the web guide system is defined as the position accuracy of the web just coming out of the probe. The accuracy of the web guiding system is determined by three factors, including the deviation of the invasive web, the accuracy of the web guiding system itself, the installation accuracy of the web guide machine.
The
automatic web guide system is a controller of tracking edge or printed line of the working material to perform high-precision differential and swing, which is composed of large-scale industrial integrated circuits, with strong anti-interference ability, high reliability and long service life. The lateral web offset in the transmission is detected by the photoelectric sensor, and the electrical signal proportional to the offset will be sent to the controller. After power amplification, it is sent to the motor to make it rotate forward, stop or reverse and the motor shaft end is connected with a lead screw. The screw drives the roller to move the rolling roller in the rolling rail to move laterally in the offset direction, thereby reaching the purpose of the automatic web guide. The signal is being firmly measured and the high-precision of the web offset is the premise of automatic web guiding.
1. Support photoelectric sensor, ultrasonic sensor, CCD sensor.
2. Intelligent detection sensor parameters, no need for calibration sensors in most situations.
3. Automatic stroke measurement, not any mechanical switch needed.
4. Adopts variable PI adjustment algorithm, high precision, fast responding, with smaller error.
5. Super high response speed of 500 microseconds.
6. Analog sensor signal adopts 16-bit AD sampling.
7. Adopts the FIR digital wave filter, with strong anti-interference ability and more stable signals.
8. DC servo motor pushing the ball screw
9.Support Simplified Chinese, Traditional Chinese, English, three languages.
10. User-friendly operation, fast and easy.
11. Support MODBUS and PLC operation.
