What is the hazard of excessive current of ultra fine grinding machine?

325 views 1 replies
Reply to Topic
posuiji

Age: 2023
Total Posts: 0
Points: 10

Location:
,
Ultrafine grinding for the material processing process, customer expectations for it is high productivity, less fault, which is a good production efficiency of the two very important aspects, but the contrary, the production of the fault is unavoidable, and because the Ultra-fine mill is a fine powder production equipment, In the process of operation and other aspects of the requirements of very strict, so the occurrence of the production of fault is very common.

The general production process, ultrafine mill will be the failure of the main capacity changes, product quality changes, etc., these phenomena are due to different factors, no matter what kind of, the need for timely maintenance, in which the phenomenon of high host current is a common fault, So what is the impact of this failure on the device?

Through the research and analysis, it is found that the phenomenon of high host current in the production of ultrafine grinding machine will cause the temperature of the equipment to rise, and the high temperature will cause the damage of the parts, so this will result in the decrease of efficiency and the increase of maintenance cost, so how to solve this problem?

Through the analysis found that ultrafine milling equipment production, the phenomenon of the host current is too high, mainly due to improper operation, feeding time to feed too much, so that the air duct has been blocked, and then the pipeline exhaust is not smooth, so that the circulation of gas heating, more eventually caused by the phenomenon of the host current rise.

Posted 19 Oct 2017

valandrian says
bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237
bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237
bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237
bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237
bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237
bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237
bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237
bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237
bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237
bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237
bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237bd39237
bd39237
Posted 15 May 2018

Reply to Topic