Sand washing plant is the mineral machine that used for the wash of mineral ore and sand. The
sand washing machine is widely used in the construction field, sand factory, hydropower station and concrete dam. It has the advantages of high degree of cleanliness, reasonable structure, big handle capacity, less lose of sand and low consumption. During the washing process, the failure rate is lower than the common sand washing plant. This machine is the best choose for the sand washing industry. So, sand washing plant is the important washing equipment.
The attention matters during the installation process of
sand washing machine:
1. This machine should install on the level concrete foundation and fixed by the foundation bolt.
2. The main engine and ground should keep vertical.
3. After the installation, we should check that if the bolt and host port is fixed or not.
4. The device should be equipped with power line and control switch according to the motive power.
5. After the check, we need to test the machine under the condition of empty load. If the check is normal, we can begin the normal production.
6. Before the start of the machine, we should check the lubricating point to ensure the enough grease.
7. After the normal start of motor, we can even feed the machine.
8. When all the materials are discharged, we can stop the electrical machine.
9. We should regularly check the bolt and change it timely to avoid the unnecessary losses.
