You will clear a paper stick. Obviously, I have a different article for this, however, allows simply put it again here so you won't need to go anyplace.
Turn on the printer.
Slide open the information plate and evacuate all free paper.
In the event that there is a paper stuck in the printer, evacuate it by delicately hauling it out.
Altogether check the plate to check whether there is any torn paper cleared out. Search for other outside articles also.
Slide in the info plate. Go to the back of the printer.
While still on, expel the power rope from the printer. Expel any connected links and USB also.
Open the printer top and check whether there is any remote protests or torn paper.
Expel them delicately to maintain a strategic distance from inside harm. Make sure to check the printer altogether for any pieces and little bits of paper utilizing an electric lamp.
Find the cleanout entryway handle (it's the white handle close to the back of the printer)
Haul out the cleanout entryway. Check if there is any outside articles or stuck paper. Make certain to check the printer altogether.
Lift the duplexer switch to check whether there is anything stuck in the middle.
Turn the printer on its side and check if there is any paper stuck or remote articles stuck.
Fitting the power rope and different links back to the printer.
Turn on the printer and hold up until the point when it warmed up.
Run a test print.
In the event that the printer prints, the issue is settled. In the event that it doesn't print, proceed to the following fix.
Telstra broadband Contact
